Every time rain falls on Nashville, it must go somewhere. Stormwater is rainfall and snowmelt that runs off roofs, driveways, streets, and lawns instead of soaking into the ground. In Nashville, Metro Water Services (MWS), a department of the Metropolitan Government of Nashville and Davidson County, manages how that runoff is collected, directed, and regulated. Understanding this system helps property owners and managers make sense of local drainage rules, fees, and flood risks.
MWS oversees three connected services: drinking water, wastewater, and stormwater. The stormwater division maintains public drainage infrastructure such as storm drains, catch basins, culverts, pipes, and open channels. It also reviews development plans, responds to drainage complaints, and enforces local stormwater regulations.
Most of Nashville's stormwater system is a separate storm sewer system, which carries rainwater apart from household sewage. Water entering a storm drain typically flows to a nearby creek and eventually reaches the Cumberland River without treatment. Because of this, anything that washes into a street gutter, including oil, fertilizer, grass clippings, and sediment, adds to stormwater pollution in local waterways.
Parts of the older urban core work differently. These areas rely on a combined sewer system, which carries stormwater and wastewater in the same pipe. During heavy rain, a combined sewer overflow (CSO) can occur when flows exceed pipe capacity. The U.S. Environmental Protection Agency regulates CSOs under the Clean Water Act, and Nashville has long worked to reduce them.

Nashville's weather makes stormwater management a constant challenge. According to the National Weather Service, the city receives roughly 48 to 50 inches of rain in a typical year. Spring brings the most intense storms, and thunderstorms can drop heavy rain in a short window.
The city's geography adds pressure. Davidson County sits in the Cumberland River watershed, the land area that drains into a shared river system, and many creeks run through dense neighborhoods. Rolling terrain moves water quickly downhill, while clay-rich soils in parts of Middle Tennessee absorb water slowly.
The historic May 2010 flood showed how serious these conditions can become. Heavy rain over two days that month pushed the Cumberland River and its tributaries far beyond their banks. The flood caused widespread damage across Nashville and led to a major review of floodplain management and drainage planning. Since then, flood preparedness has stayed a priority in local planning.
Federal and state rules form the backbone of local stormwater requirements. Under the Clean Water Act, large cities operate under a Municipal Separate Storm Sewer System (MS4) permit, which the EPA describes in its MS4 guidance. In Tennessee, the Department of Environment and Conservation (TDEC) administers these permits, and Metro Nashville must meet the conditions set within them.
At the local level, the Metro Code includes a stormwater ordinance. Its main requirements fall into several areas:
Nashville also funds stormwater work through a user fee. The fee is based on impervious surface, meaning hard areas like roofs, driveways, and parking lots that water cannot penetrate. Larger paved areas generate more runoff, so they typically carry a higher charge.

Knowing where public responsibility ends and private responsibility begins helps owners avoid costly surprises. Flooding and erosion disputes often start with confusion over who maintains a pipe, ditch, or slope.
MWS generally maintains drainage structures in public rights-of-way and within recorded public easements. Owners are typically responsible for drainage features on their own land. This includes private culverts, driveway pipes, swales, and retaining structures. Property managers overseeing multiple sites should confirm easement boundaries, since they differ from lot to lot.
A few features appear on many Nashville lots. A swale is a shallow, vegetated channel that guides runoff away from buildings. A French drain is a gravel-filled trench with a perforated pipe that redirects groundwater. Downspout extensions move roof runoff away from foundations. Each feature works only when it stays clear of debris and sediment.
Nashville's seasons create a predictable maintenance cycle. Autumn leaf fall clogs gutters, catch basins, and swale inlets just before the wetter months, and leaves, grit, and litter left on paved surfaces can wash into storm drains with the next rain.
Winter freeze and thaw cycles can shift soil and crack pavement, which opens new paths for runoff. Spring storms then test every system at once. Clear gutters, intact grading, and open drainage paths help water move away from structures. The Federal Emergency Management Agency publishes flood maps that show whether a parcel lies within a designated floodplain, which is useful context for anyone assessing a property.
Stormwater management in Nashville is a shared effort. Metro Water Services builds and regulates the public system, while owners manage runoff on their own land. When both sides do their part, the whole watershed benefits.